Yep, works as you say it does. This hand rotates about the pivot point I set to the middle of the bottom edge. Works like the usual second hand with half the bottom transparent and the pivot point set to the middle of the image.
I note that in Facer using VAR I reset the bezel with two overlapping tap points. One sets VAR_1 to zero and the other sets VAR_2 to zero. Rotate 5 steps with the 9 and one step with a tap on the three. Two tap locations above 12 both see the tap and set both VAR to zero. Should do the same for this hands trick.
Thanks again.